U.S.A. and Puerto Rico
- Switch the ignition ON (engine off or on).
- Select [Applications] on the center display.
- Select [Vehicle Status Monitor] on the center display.
- Select [Schedule Maintenance] on the center display.
- Select [Oil Change] on the center display.
- Select the following items and change the setting.
Display of center display Function Initial setting Setting contents Control unit Oil Life (1) Oil life to oil inspection/replacement can be displayed. 12, 000 km/7, 500 miles - Connectivity master unit (CMU) Reset Maintenance monitor setting can be reset to the initial value. Back Back/Reset Connectivity master unit (CMU) (1) If "Flexible" is selected in setting