DTC C1A67-54; Radar Unit Aiming Adjustment Not Implemented: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Radar unit aiming adjustment not implemented |
| Detection condition |
- Radar unit aiming adjustment is not performed
|
| Fail-safe |
- Inhibits the mazda radar cruise control (MRCC) system control
- Inhibits the smart brake support (SBS) system control
- Inhibits the distance recognition support system (DRSS) control
|
| Possible cause |
- Radar unit aiming adjustment not performed
- The radar unit which had already been installed on another vehicle is installed on a different vehicle.
NOTE:
- If the ignition is switched off when an error occurs during the aiming adjustment command execution, a DTC is detected indicating that the aiming adjustment was not performed.
|
| System wiring diagram |
Not applicable |