DTC U2300-54; Configuration Data Not Received From Instrument Cluster: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Configuration data not received from instrument cluster |
| Detection condition |
- Forward sensing camera (FSC) cannot receive the configuration data from the instrument cluster with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Inhibits the lane departure warning system (LDWS).
- Inhibits the lane-keep assist system.
- Inhibits the high beam control (HBC) system.
- Inhibits the smart city brake support (SCBS).
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the forward sensing camera (FSC) to the forward sensing camera (FSC), 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Forward sensing camera (FSC) malfunction
|
| System wiring diagram |
Not applicable |