| Description |
U0001:88
- Unit communication error (HS-CAN)
U0010:88
- Unit communication error (MS-CAN)
U0100:00
- Communication error with PCM
U0101:00
- Communication error with TCM
U0104:00
- Communication error with radar unit
U0114:00
- Communication error with AWD control module
U0121:00
- Communication error with DSC HU/CM
U0128:00
- Communication error with electric parking brake control module
U0131:00
- Communication error with electric power steering (EPS) control module
U0140:00
- Communication error with front body control module (FBCM)
U0142:00
- Communication error with rear body control module (RBCM)
U0151:00
- Communication error with SAS control module
U0156:00
- Communication error with connectivity master unit (CMU)
U0182:00
- Communication error with auto leveling control module/adaptive front lighting system (AFS) control module
U0214:00
- Communication error with start stop unit
U0232:00
- Communication error with blind spot monitoring (BSM) control module (LH)
U023A:00
- Communication error with forward sensing camera (FSC)
|
| Detection condition |
- U0001:88
- The instrument cluster detects a CAN bus communication line (HS-CAN) malfunction.
- U0010:88
- The instrument cluster detects a CAN bus communication line (MS-CAN) malfunction.
- U0100:00
- The instrument cluster cannot receive CAN signal from the PCM.
- U0101:00
- The instrument cluster cannot receive CAN signal from the TCM for 1 s or more.
- U0104:00
- The instrument cluster cannot receive CAN signal from the radar unit.
- U0114:00
- The instrument cluster cannot receive CAN signal from the AWD control module for 1 s or more.
- U0121:00
- The instrument cluster cannot receive CAN signal from the DSC HU/CM.
- U0128:00
- The instrument cluster cannot receive CAN signal from the electric parking brake control module for 1 s or more.
- U0131:00
- The instrument cluster could not receive CAN signal from the electric power steering (EPS) control module for 1 s or more.
- U0140:00
- The instrument cluster cannot receive CAN signal from the front body control module (FBCM) for 5 s or more.
- U0142:00
- The instrument cluster cannot receive CAN signal from the rear body control module (RBCM) for 5 s or more.
- U0151:00
- The instrument cluster cannot receive CAN signal from the SAS control module for 2 s or more.
- U0156:00
- The instrument cluster cannot receive CAN signal from the connectivity master unit (CMU) for 5 s or more.
- U0182:00
- The instrument cluster cannot receive CAN signal from the auto leveling control module/adaptive front lighting system (AFS) control module for 5 s or more.
- U0214:00
- The instrument cluster could not receive CAN signal from the start stop unit.
|
| Detection condition |
- U0232:00
- The instrument cluster cannot receive CAN signal from the blind spot monitoring (BSM) control module (LH) for 5 s or more.
- U023A:00
- The instrument cluster cannot receive CAN signal from the forward sensing camera (FSC).
|
| Fail-safe |
Not applicable |
| Possible cause |
- Malfunction in CAN bus communication line
- Malfunction in CAN line between the PCM and instrument cluster
- Malfunction in CAN line between the TCM and instrument cluster
- Malfunction in CAN line between the radar unit and instrument cluster
- Malfunction in CAN line between the AWD control module and instrument cluster
- Malfunction in CAN line between the DSC HU/CM and instrument cluster
- Malfunction in CAN line between the electric parking brake control module and instrument cluster
- Malfunction in CAN line between the electric power steering (EPS) control module and instrument cluster
- Malfunction in CAN line between the front body control module (FBCM) and instrument cluster
- Malfunction in CAN line between the rear body control module (RBCM) and instrument cluster
- Malfunction in CAN line between the SAS control module and instrument cluster
- Malfunction in CAN line between the connectivity master unit (CMU) and instrument cluster
- Malfunction in CAN line between the auto leveling control module/adaptive front lighting system (AFS) control module and instrument cluster
- Malfunction in CAN line between the start stop unit and instrument cluster
- Malfunction in CAN line between the blind spot monitoring (BSM) control module (LH) and instrument cluster
- Malfunction in CAN line between the forward sensing camera (FSC) and instrument cluster
|
| System wiring diagram |
Not applicable |