LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Plate Removal/Installation

Plate Removal/Installation

  1. Lift up the vehicle.
  2. Remove the bolts and fasteners.
    Fig 1: Installing Plate Bolts And Fasteners
    G11434143Courtesy of MAZDA MOTORS CORP.
  3. Pull the plate out of the positioning stud bolt and remove the plate.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals