FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

Lift up the vehicle.
Remove the screws and fasteners.

Fig 1: Installing Front Under Cover No. 1 Screws And Fasteners
Courtesy of MAZDA MOTORS CORP.
Remove the bolts.

Fig 2: Installing Front Under Cover No. 1 Bolts
Courtesy of MAZDA MOTORS CORP.
Remove the fastener which can be verified at the position where front under cover No. 2 was pulled back.

Fig 3: Locating Front Under Cover No. 1 Fasteners
Courtesy of MAZDA MOTORS CORP.
Move the front under cover No. 1 in the direction of the arrow shown in the figure and remove it.

Fig 4: Moving Front Under Cover No. 1
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.