Stud bolt, washer, and nut installation note
- Temporarily tighten the stud bolt, washer and nut.
- Remove the transmission jack.
- Shake the rear differential forward and back/left and right to improve the installation fit of the rear differential.
- Tighten the stud bolt and nut completely.
Tightening torque
Stud bolt: 30-37 N.m {3.1-3.7 kgf.m, 23-27 ft.lbf}
Nut: 137-167 N.m {14-17 kgf.m, 102-123 ft.lbf}