DTC U0001-88; U0100-00; U0101-00; U0104-00; U0114-00; U0131-00; U0140-00; U0151-00; U 0155-00; U0235-00; CAN Communication Module Communication Error: Notes

DTC U0001-88; U0100-00; U0101-00; U0104-00; U0114-00; U0131-00; U0140-00; U0151-00; U 0155-00; U0235-00; CAN COMMUNICATION MODULE COMMUNICATION ERROR DETECTION CONDITION AND POSSIBLE CAUSE

DTC	U0001:88	CAN communication: module communication error
	U0100:00	CAN communication: communication error to PCM
	U0101:00	CAN communication: communication error to TCM
	U0104:00	CAN communication: communication error to radar unit
	U0114:00	CAN communication: communication error to AWD control module
	U0131:00	CAN communication: communication error to EPS control module
	U0140:00	CAN communication: communication error to body control module
	U0151:00	CAN communication: communication error to SAS control module
	U0155:00	CAN communication: communication error to instrument cluster
	U0235:00	CAN communication: communication error to laser sensor
DETECTION CONDITION		U0001:88 Open or short circuit in CAN system wiring harness is detected. U0100:00 Communication error to PCM is detected. U0101:00 Communication error to TCM is detected. U0104:00 Communication error to radar unit is detected. U0114:00 Communication error to AWD control module is detected. U0131:00 Communication error to EPS control module is detected. U0140:00 Communication error to body control module is detected. U0151:00 Communication error to SAS control module is detected. U0155:00 Communication error to instrument cluster is detected. U0235:00 Communication error to laser sensor is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		CAN communication line malfunction CAN communication line malfunction with PCM CAN communication line malfunction with TCM CAN communication line malfunction with radar unit CAN communication line malfunction with AWD control module CAN communication line malfunction with EPS control module CAN communication line malfunction with body control module CAN communication line malfunction with SAS control module CAN communication line malfunction with instrument cluster CAN communication line malfunction with laser sensor Instrument cluster malfunction
SYSTEM WIRING DIAGRAM		-