LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> On-Board Diagnostic - Dynamic Stability Control (DSC) >> DTC C001D-01; C001D-49; RR Outlet Solenoid Valve Malfunction >> Diagnostic Procedure

Diagnostic Procedure

DTC C001D-01; C001D-49; RR OUTLET SOLENOID VALVE MALFUNCTION DIAGNOSTIC PROCEDURE

Step Inspection Action
1 VERIFY RR OUTLET SOLENOID VALVE OPERATION Yes Go to the next step.
No Replace the DSC HU/CM, then go to the next step.
(See DSC HU/CM REMOVAL/INSTALLATION .)
2 VERIFY DTC TROUBLESHOOTING COMPLETED Yes Repeat the inspection from Step1. If the malfunction recurs, replace the DSC HU/CM, then go to the next step.
(See DSC HU/CM REMOVAL/INSTALLATION .)
No Go to the next step.
3 VERIFY NO DTC IS PRESENT
  • Are any DTCs present?
Yes Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM] .)
No DTC troubleshooting completed.