LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Rear Parking Brake Cable Removal/Installation >> Rear Parking Brake Cable (Rear Caliper Side) Installation Note

Rear Parking Brake Cable (Rear Caliper Side) Installation Note

  1. Install the rear parking brake cable to the torsion beam axle hook.
    Fig 1: Rear Parking Brake Cable And Torsion Beam Axle Hook
    G11430684Courtesy of MAZDA MOTORS CORP.
  2. Install the rear parking brake cable to the rear caliper.
scientia non olet · About LEMON Manuals