Pedal Height Inspection

1. Measure the distance from the center of the upper surface of the pedal pad to the floor covering and verify that it is as specified.

Fig 1: Checking Distance From Upper Surface Of Pedal Pad To Floor Covering

Courtesy of MAZDA MOTORS CORP.

Brake pedal height (reference value) 

131 mm {5.16 in}

• If not within the specification, inspect the following items and repair or replace the applicable part if there is any malfunction.
  • Power brake unit installation condition
  • Deformation of or damage to the power brake unit fork
  • Brake pedal installation condition
  • Clevis pin wear
• If there is no malfunction in the above items, replace the brake pedal. (See BRAKE PEDAL REMOVAL/INSTALLATION .)