DTC C0062-28; C0062-54; C0062-64; Longitudinal-G Signal Outside Of Specified Value: Notes

DTC C0062-28; C0062-54; C0062-64; LONGITUDINAL-G SIGNAL OUTSIDE OF SPECIFIED VALUE DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0062:28	Longitudinal-G signal
	C0062:54
	C0062:64
DETECTION CONDITION		C0062:28 Longitudinal-G sensor signal outside of specified value. C0062:54 No longitudinal-G sensor initialization is detected. C0062:64 Difference between longitudinal-G calculated by each sensor and longitudinal-G received from low-G sensor outside of specified value is detected.
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		The initialization procedure for the low-G sensor has not been performed SAS control module malfunction DSC HU/CM malfunction
SYSTEM WIRING DIAGRAM		-