LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Rear Wiper Arm And Blade Removal/Installation >> Rear Wiper Arm >> Rear wiper arm installation note

Rear wiper arm installation note

  1. Clean the serrated connecting part with a wire brush before installing the rear wiper arm.
Fig 1: Cleaning Serrated Connecting Part With Wire Brush
G11430479Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals