LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Sail Garnish Removal

Sail Garnish Removal

  1. Open the front door.
  2. Fully open the front door glass.
  3. Insert the remover tool in the position shown in the figure and remove the double-sided adhesive tape.
    Fig 1: Removing Double-Sided Adhesive Tape
    G11434198Courtesy of MAZDA MOTORS CORP.
  4. Insert a remover tool into the position shown in the figure, move it in the directions of the arrow and detach the sail garnish clips.
    Fig 2: Detaching Sail Garnish Clips
    G11434199Courtesy of MAZDA MOTORS CORP.
  5. Insert the remover tool in the position shown in the figure and remove the double-sided adhesive tape.
    Fig 3: Inserting Remover Tool
    G11434200Courtesy of MAZDA MOTORS CORP.
  6. Remove the sail garnish.