LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> On-Board Diagnostic - Instrument Cluster >> Active Command Modes Table [Instrument Cluster]

Active Command Modes Table [Instrument Cluster]

NOTE:
  • Simulation items on parts which are not equipped to the vehicle do not operate.
Simulation item Unit/Operation Data contents Output part name Operation condition
ALARM On/Off
  • On: Warning alarm sounds.
  • Off: Warning alarm does not sound.
 Warning alarm (instrument cluster) Ignition switched ON (engine off or on)
LCD_SEG Off/On
  • Off: Turns off the LCD.
  • On: Fully displays LCD.
 LCD (instrument cluster) Ignition switched ON (engine off or on)
Off/60 Km/h/120 Km/h
  • Off: Speedometer needle moves to the bottommost position.
  • 60 Km/h: Speedometer needle moves to approx. 61-67 km/h {38-42 mph}.
  • 120 Km/h: Speedometer needle moves to approx. 122-130 km/h {75-81 mph}.
 Speedometer (instrument cluster) Ignition switched ON (engine off or on)
Off/3000 RPM/6000 RPM
  • Off: Tachometer needle moves to bottommost position.
  • 3000 RPM: Tachometer needle moves to approx. 3, 050 rpm.
  • 6000 RPM: Tachometer needle moves to approx. 6, 100 rpm.
 Tachometer (instrument cluster) Ignition switched ON (engine off or on)
WL+IL Off/On
  • Off: Turns off all warning lights, indicator lights.
  • On: Illuminates all warning lights, indicator lights.
 Warning lights, indicator lights (instrument cluster) Ignition switched ON (engine off or on)
scientia non olet · About LEMON Manuals