Possible malfunction
NOTE:
- The system may not operate normally under the following conditions:
- The rear surface of a vehicle ahead does not reflect radio waves effectively, such as an unloaded trailer or an automobile with a loading platform covered by a soft top, vehicles with a hard plastic tailgate, and round-shaped vehicles.
- Vehicles ahead with low vehicle height and thus less area for reflecting radio waves.
- Visibility is reduced due to a vehicle ahead casting off water, snow, or sand from its tires and onto your windshield.
- The luggage compartment is loaded with heavy objects or the rear passenger seats are occupied.
- Ice, snow, or soiling is on the front surface of the front emblem.
- During inclement weather such as rain, snow, or sand storms.
- When driving near facilities or objects emitting strong radio waves.
- The beginning and end of a curve.
- Roads with continuous curves.
- Narrow lane roads due to road construction or lane closures.
- The vehicle ahead enters the radar sensor's blind spot.
- The vehicle ahead is running abnormally due to accident or vehicle damage.
- Roads with repeated up and down slopes.
- Driving on poor roads or unpaved roads.
- The distance between your vehicle and the vehicle ahead is extremely short.
- A vehicle suddenly comes close such as by cutting into the lane.
- Battery power is weak.
- The instrument cluster cannot illuminate the MRCC warning light (amber).
- Instrument cluster malfunction (malfunction in MRCC warning light (amber) illumination circuit)
- Connector connection malfunction
- Radar unit cannot illuminate the MRCC warning light (amber).
- Connector connection malfunction
- Radar unit malfunction