Diagnostic Procedure

DTC U0415:00/U0415:68/U0415:82 [LASER SENSOR] - DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY DSC HU/CM DTC Using the M-MDS, perform the DSC HU/CM DTC inspection. (See DTC INSPECTION [DSC HU/CM] .) Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [DSC HU/CM] .) DTC troubleshooting completed, then go to the next step.
1		No	Go to the next step.
2	VERIFY DTC TROUBLESHOOTING COMPLETED Using the M-MDS, clear the DTC from the laser sensor. (See CLEARING DTC [LASER SENSOR] .) Using the M-MDS, perform the laser sensor DTC inspection. (See DTC INSPECTION [LASER SENSOR] .) Is the same DTC present?	Yes	Repeat the inspection from Step1. If the malfunction recurs, replace the DSC HU/CM, then go to the next step. (See DSC HU/CM REMOVAL/INSTALLATION .)
2		No	Go to the next step.
3	VERIFY NO DTC IS PRESENT Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [LASER SENSOR] .)
3	VERIFY NO DTC IS PRESENT Are any DTCs present?	No	DTC troubleshooting completed.