Using M-MDS (LDWS sound)
- Connect the M-MDS to the DLC-2.
- After vehicle identification, select the following from the M-MDS initialization screen.
- "Module programming"
- "Programmable Parameters"
- Select menu in the "IC".
- Select an item name, and than select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| LDWS Sound. | The type of the LDWS warning alarm can be changed. | Beep | Beep/Rumble Strip | Instrument cluster |
| LDWS Volume | The volume of the LDWS warning alarm can be changed. | Volume 3 | Volume 1/Volume 2/Volume 3 | Instrument cluster |