Fuel-filler lid opener lever

While pulling the fuel-filler lid opener lever, insert a tape-wrapped flathead screwdriver into the position shown in the figure.

Fig 1: Pulling Fuel-Filler Lid Opener Lever
Courtesy of MAZDA MOTORS CORP.
Move the tape-wrapped flathead screwdriver in the direction of arrow (1) shown in the figure to press the tab, and pull the fuel-filler lid opener cable in the direction of arrow (2) to detach the fuel-filler lid opener lever from the driver's side lower panel.
CAUTION:
- Be careful not to damage the fuel-filler lid opener lever with the flathead screwdriver.
Pull the fuel-filler lid opener lever and remove it from the driver's side lower panel.

Fig 2: Pulling Fuel-Filler Lid Opener Lever
Courtesy of MAZDA MOTORS CORP.
Disconnect the fuel-filler lid opener cable from the fuel-filler lid opener lever.
Install in the reverse order of removal.