No. 10 Malfunction Warning Light Illuminates: Notes
NO. 10 MALFUNCTION WARNING LIGHT ILLUMINATES (INSTRUMENT CLUSTER) POSSIBLE CAUSE
| 10 |
Malfunction warning light illuminates |
| POSSIBLE CAUSE |
- PCM malfunction
- Instrument cluster malfunction
- Connector or pin malfunction
- Short circuit in wiring harness between CAN-L, CAN-H and ground
- Open circuit in CAN wiring harness (CAN-L, CAN-H)
- CAN wiring harness (CAN-L, CAN-H) short each other
- Malfunction in brake switch signal input to PCM (PCM stores DTC P0571:00 and/or P0703:00.)
|