DTC U0415-68: Signal Error From DSC HU/Cm [Instrument Cluster]: Notes

DTC U0415:68 (INSTRUMENT CLUSTER) DETECTION CONDITION AND DETECTION CONDITION

DTC U0415:68	Signal error from DSC HU/CM
DETECTION CONDITION	Instrument cluster receives the error signal from DSC HU/CM.
FAIL-SAFE FUNCTION	-
POSSIBLE CAUSE	NOTE: This DTC may be stored if the DSC HU/CM receives an error signal such as a yaw rate error signal sent from the SAS control module. DTCs are stored in the DSC HU/CM or SAS control module. DSC HU/CM malfunction SAS control module malfunction Instrument cluster malfunction
SYSTEM WIRING DIAGRAM	-