Active Command Modes Table

Command name	Operation condition	Output part name	Unit/Operation
ALARM	On: Sounds the warning alarm. Off: Stops the warning alarm.	Warning alarm (Instrument cluster)	On/Off
ECT_GAUGE	Off: Turn off the low engine coolant temperature indicator light (blue)/high engine coolant temperature warning light (red). C (50 DegC): Illuminates low engine coolant temperature indicator light (blue). H (128 DegC): Illuminates high engine coolant temperature warning light (red).	Low engine coolant temperature indicator light (blue)/High engine coolant temperature warning light (red) (Instrument cluster)	Off/C (50 DegC)/H (128 DegC)
FUEL_GAUGE	NOTE: Displays in the M-MDS but it does not operate.
LCD_SEG	Off: Turn off the LCD segment. On: LCD segment displayed.	LCD segment (Instrument cluster)	Off/On
SPDMTR	Off: Speedometer gauge needle moves to 0 km/h {0 mph}. 60 Km/h: Speedometer gauge needle moves to approx. 63 km/h {39 mph}. 120 Km/h: Speedometer gauge needle moves to approx. 126 km/h {78.3 mph}.	Speed meter (Instrument cluster)	Off/60 Km/h/120 Km/h
TACHOMTR	Off: Tachometer gauge needle moves to 0 RPM. 3000 RPM: Tachometer gauge needle moves to approx. 3, 100 RPM. 6000 RPM: Tachometer gauge needle moves to approx. 6, 300 RPM.	Tachometer (Instrument cluster)	Off/3000 RPM/6000 RPM
WL+IL	Off: Turn off all warning/indicator lights. On: Turn on all warning/indicator lights.	Warning/indicator light (Instrument cluster)	Off/On