Indicator Removal/Installation (Without Electric Parking Brake): Notes

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the following parts:
1. Upper panel (See UPPER PANEL REMOVAL .) (See UPPER PANEL INSTALLATION .)
2. Selector lever knob (See Selector Lever Removal/Installation .)
3. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
Remove in the order indicated in the table.
Install in the reverse order of removal.

Fig 1: Removing Connector, Indicator Panel And Indicator

Courtesy of MAZDA MOTORS CORP.

COMPONENT DESCRIPTION

1	Connector
2	Indicator panel
3	Indicator (See Indicator Removal Note (Without Electric Parking Brake) .)