LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 3 Sport, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

  1. Lift up the vehicle.
  2. Remove the bolts and fasteners shown in the figure.
    Fig 1: Locating Front Under Cover No. 2 Bolts And Fasteners
    G11448870Courtesy of MAZDA MOTORS CORP.
  3. Remove the front under cover No. 2.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals