LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 3 Sport, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 1 REMOVAL/INSTALLATION

  1. Remove the bolts, screws and fasteners shown in the figure.
    Fig 1: Locating Screws, Bolts And Fasteners
    G11448868Courtesy of MAZDA MOTORS CORP.
  2. Remove the front under cover No. 1 in the direction of the arrow shown in the figure while detaching the guide.
    Fig 2: Front Under Cover No. 1 Location
    G11448869Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals