LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-9 Touring, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Global Positioning System (GPS) Antenna Removal/Installation

Global Positioning System (GPS) Antenna Removal/Installation

  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Glove compartment (Refer to GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    2. Passenger-side decoration panel (Refer to DECORATION PANEL REMOVAL/INSTALLATION .)
    3. Upper column cover (Refer to COLUMN COVER REMOVAL/INSTALLATION .)
    4. Meter hood No. 1 (Refer to METER HOOD REMOVAL/INSTALLATION .)
    5. Instrument cluster (Refer to INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
  3. Remove the screw.
    Fig 1: Identifying GPS Antenna Connector And Screw
    G10950723Courtesy of MAZDA.
  4. Disconnect the connector.
  5. Remove the GPS antenna.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals