LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake-Air System And Turbocharger >> WASTEGATE Valve Actuator Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Disconnect the wastegate valve actuator connector. (Refer to DYNAMIC PRESSURE TURBO REMOVAL/INSTALLATION .)
  3. Inspect for continuity between wastegate valve actuator terminals B and F.
    Fig 1: Identifying Wastegate Valve Actuator Terminals
    G10946803Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals