LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-9 Signature >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake-Air System And Turbocharger >> Accelerator Pedal Removal/Installation

Accelerator Pedal Removal/Installation

  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove in the order indicated in the table.
    Fig 1: Identifying Accelerator Pedal Bolt With Torque Specifications
    G10946800Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Accelerator pedal
    2 APP sensor connector
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals