DTC U2300-52; U2300-54; U2300-55; U2300-56; U2300-64: Configuration Data Not Recorded: Notes

DTC	U2300:52, U2300:54, U2300:55, U2300:56, U2300:64		Configuration data not recorded/incompatible configuration data received
DETECTION CONDITION		DSC CM detects configuration data not record or data error
FAIL-SAFE FUNCTION		Refer to "Fail-safe Function Malfunction Contents". (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		Module configuration procedure is not done properly Correct data cannot be received from instrument cluster Another vehicles control modules been installed (instrument cluster, PCM DSC HU/CM)
SYSTEM WIRING DIAGRAM		-