Fuel-filler Lid Opener Lever

While pulling the fuel-filler lid opener lever, insert a tape-wrapped flathead screwdriver into the position shown in the figure.

Fig 1: Pulling Fuel-Filler Lid Opener Lever
Courtesy of MAZDA MOTORS CORP.
Move the tape-wrapped flathead screwdriver in the direction of arrow (1) shown in the figure to press the tab, and pull the fuel-filler lid opener lever in the direction of arrow (2) to detach it from the lower panel.
CAUTION:
- Remove the fuel-filler lid opener lever while being careful not to damage the fuel-filler lid opener cable with the flathead screwdriver.
Pull the fuel-filler lid opener lever to remove it from the lower panel.

Fig 2: Removing Fuel-Filler Lid Opener Lever From Lower Panel
Courtesy of MAZDA MOTORS CORP.
Disconnect the fuel-filler lid opener cable from the fuel-filler lid opener lever.
Install in the reverse order of removal.