LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 6 Touring, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION

  1. Lift up the vehicle.
  2. Remove fasteners.
    Fig 1: Identifying Front Under Cover No. 2 With Bolts And Fasteners
    G10992132Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolts.
  4. Remove the front under cover No. 2.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals