LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 5 Sport >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Front Scuff Plate Removal/Installation

Front Scuff Plate Removal/Installation

  1. Detach tabs A while pulling the front scuff plate in the direction of the arrow (1) shown below, then detach pin B, clip C, pins D and pin E while pulling in the direction of the arrow (2).
    Fig 1: Pulling Front Scuff Plate
    G08153270Courtesy of MAZDA MOTORS CORP.
  2. Remove the front scuff plate.
  3. Pull the front scuff plate outer in the direction of arrow (3), (4), (5) while remove the pin E, pins F and clip G.
  4. Remove the front scuff plate outer.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals