LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 5 Sport >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Hazard Warning Switch Removal/Installation

Hazard Warning Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    2. Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
    3. Switch panel (See SWITCH PANEL REMOVAL/INSTALLATION .)
  3. Remove the screws.
    Fig 1: Identifying Hazard Warning Switch, Screw And Switch Panel
    G08153356Courtesy of MAZDA MOTORS CORP.
  4. Remove the hazard warning switch.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals