LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> 5 Sport >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Horn Inspection

Horn Inspection

  1. Disconnect the negative battery cable.
  2. Slightly bend back the front mudguard. (See MUDGUARD REMOVAL/INSTALLATION .)
  3. Remove the horn. (See HORN REMOVAL/INSTALLATION .)
  4. Apply battery positive voltage and connect the ground as shown below and verify the keyless beeper sound operation.
    Fig 1: Energizing Horn
    G08153569Courtesy of MAZDA MOTORS CORP.
    • If the beep sound cannot be verified, replace the horn.