Down switch
WARNING: This page is about a different variant/trim than selected.
Fig 1: Measuring Continuity Between Steering Shift Switch Wiring Harness Connector Terminals C And D
| Switch | Terminal | Test condition | Continuity |
|---|---|---|---|
| Up switch | A-B | Up switch is operated (up switch is pulled outward) | Continuity |
| Up switch is not operated (up switch is not pulled outward) | No continuity | ||
| Down switch | D-E | Down switch is operated (down switch is pulled outward) | Continuity |
| Down switch is not operated (down switch is not pulled outward) | No continuity |
- If there is any malfunction, replace the steering shift switch. (See STEERING SHIFT SWITCH REMOVAL/INSTALLATION .)