LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle [Shift Mechanism]) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable End (Transaxle side) Removal Note

Selector Cable End (Transaxle side) Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clip and disconnect the selector cable end (transaxle side) from the manual shaft lever.
    Fig 1: Identifying Clip, Selector Cable End And Manual Shaft Lever
    G08150779
scientia non olet · About LEMON Manuals