DTC P0883:00: Notes
WARNING: This page is about a different variant/trim than selected.
| DTC P0883:00 |
Battery voltage high |
| DETECTION CONDITION |
- Battery voltage is 16.02 V or more
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits 1GR, 2GR, 4GR and 5GR
- Maximizes line pressure
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Generator malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |