LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service, Removal & Installation FS5A-El)) >> Drive Plate Removal/Installation >> Drive Plate Installation Bolt Removal Note

Drive Plate Installation Bolt Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Set the SST  to the engine.
    Fig 1: Identifying Drive Plate Installation Bolts Loosening Sequence
    G08152157
  2. Remove the drive plate installation bolts uniformly in the order shown in the figure.