LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels And Bumpers >> Front Fender Panel Removal/Installation

Front Fender Panel Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION .)
    2. Front combination lights (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)
    3. Front fender molding (See COWL GRILLE REMOVAL/INSTALLATION .)
    4. Side step molding (See SIDE STEP MOLDING REMOVAL .)
  3. Remove fastener A and bolt B, then remove the front fender panel.
    Fig 1: Front Fender Panel, Fastener A And Bolts B With Torque Specifications
    G08152747
  4. Install in the reverse order of removal.
  5. Adjust the headlight aiming. (See HEADLIGHT AIMING .)
scientia non olet · About LEMON Manuals