LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels And Bumpers >> Front Bumper Removal/Installation >> Front Bumper Installation Note

Front Bumper Installation Note

  1. Spread the front bumper ends apart.
    Fig 1: Pressing Front Bumper Connecting Area
    G08152729
  2. Attach the front bumper to the body.
  3. Press the front bumper connecting area in the direction of the arrow shown in the figure to engage with the front bumper slider.
scientia non olet · About LEMON Manuals