Remaining Amount of Unbalance Confirmation
- After installing the outer and inner balance weights, operate the wheel balancer again.
- Confirm that the remaining unbalance does not exceed the following on either side.
- If the remaining unbalance exceeds the specifications, adjust the wheel balance again.
KNOCK-TYPE BALANCE WEIGHT SPECIFICATIONS
| Wheel Size | Outer (Adhesive-type) |
Inner (Knock-type) |
|---|---|---|
| 16 inch wheel | 17 g {0.60 oz} | 10 g {0.35 oz} |
| 17 inch wheel | 16 g {0.56 oz} | 10 g {0.35 oz}} |