LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front CROSSMEMBER Removal/Installation >> Tie-rod End Ball Joint Removal Note

Tie-rod End Ball Joint Removal Note

  1. Remove the tie-rod end locknut.
  2. Detach the tie-rod end from the steering knuckle using the SST  .
    Fig 1: Detatching Tie-Rod End From Steering Knuckle
    G08150429
scientia non olet · About LEMON Manuals