LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> Steering >> Power Steering >> Electronic Power Steering System >> Electric Power Steering Oil Pump Component Removal/Installation >> Connector Removal Note

Connector Removal Note

  1. Before disconnecting the connector, clean the connector with a brush or cloth to remove foreign matter.
  2. Disconnect the connector.
  3. After removing the connector, install the cap included in the new pump kit package being careful that fluid or foreign matter does not penetrate the connector area of the control module.
    NOTE:
    • If a new pump kit is not available, adhere protective tape to the connector.
scientia non olet · About LEMON Manuals