CMDTC Self Test
- Connect the M-MDS(IDS) to the DLC-2.
- Expose the solar radiation sensor to natural sunlight.NOTE:
- If natural sunlight is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC "B10BE:12, B10BE:13".
- After the vehicle is identified, select the following items from the initialization screen of the IDS.
- Select "Self Test".
- Select "All CMDTCs".
- Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
- After completion of repairs, clear all DTCs stored in the climate control unit. (See CLEARING DTC [FULL-AUTO AIR CONDITIONER] .)