LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle Clutch [G66M-R]) >> Clutch Unit Removal/Installation >> Clutch Cover and Disc Removal Note

Clutch Cover and Disc Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the SSTs  .
    Fig 1: Installing SSTs
    G08152025
  2. Loosen each bolt one turn at a time in a crisscross pattern until spring tension is released.
  3. Remove the clutch cover and disc.