Master Cylinder Reservoir: Installation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Mazda B4000, 2004 Mazda B3000, 2004 Mazda B2300, 2003 Mazda B4000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Whenever replacing the brake master cylinder reservoir, replace the grommets.
Lubricate grommets with appropriate brake fluid and insert in the brake master cylinder. See Fig 1 . Press the master cylinder reservoir into the grommets until it snaps. Connect brake fluid level switch connector. Fill the brake master cylinder reservoir with appropriate brake fluid.