LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Disc Brake System & Drum Brake System) >> Adjustments >> Front Wheel Bearings

Front Wheel Bearings

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Mazda B4000, 2004 Mazda B3000, 2004 Mazda B2300, 2003 Mazda B4000, and 2003 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Remove front wheel assemblies. Remove grease cap, cotter pin and retainer. While rotating rotor, tighten adjusting nut 17-24 ft. lbs. (23-34 N.m) to seat bearings. Back off adjusting nut 180 degrees. Tighten adjusting nut to 18 INCH lbs. (2.0 N.m). Install bearing retainer. Remove and relocate retainer to align cotter pin. DO NOT turn adjusting nut to align cotter pin. Install NEW cotter pin.

scientia non olet · About LEMON Manuals