LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine Mechanical (Service Information)) >> Timing Chain Removal/Installation >> Cylinder Head Cover (LH) Installation Note

Cylinder Head Cover (LH) Installation Note

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply silicone sealant to the mating faces as shown.
    Fig 1: Identifying Silicone Sealant Application Locations
    G01197386Courtesy of MAZDA MOTORS CORP.
  2. Install the cylinder head cover with a new gasket.
  3. Tighten the bolts in the order shown.
    Fig 2: Cylinder Head Cover Bolt Tightening Sequence (LH)
    G01197387Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals