LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Door Locks & Keyless Entry) >> Removal & Installation >> Pcm >> Glove Compartment Removal/Installation

Glove Compartment Removal/Installation

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bend the stoppers inward, then remove.
    Fig 1: Adjusting Stoppers
    G01196559Courtesy of MAZDA MOTORS CORP.
  2. Pull the glove compartment toward you while pushing it downward (1), then remove clip A.
  3. Slide the glove compartment toward driver's side door (2).
  4. Install in the reverse order of removal.
Fig 2: Removing Glove Compartment
G01196560Courtesy of MAZDA MOTORS CORP.