LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Door Locks & Keyless Entry) >> Removal & Installation >> Front Door Lock Actuator

Front Door Lock Actuator

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the front door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the door screen. See FRONT DOOR LOCK AND OPENER  .
  4. Disconnect the front door lock actuator connector.
  5. Disconnect the rods and the cables.
  6. Remove the screws, and remove the front door lock.
  7. Remove the screws, and remove the front door lock actuator from the front door lock.
  8. Install in the reverse order of removal.
Fig 1: Removing Front Door Lock Actuator Screws
G01196442Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals